HEIDENHAIN TNC 310 (286 140) - Manual (Page 14)

2
1.1 The TNC 310
HEIDENHAIN TNC controls are shop-floor programmable
contouring controls for milling, drilling and boring machines.
You can program conventional milling, drilling and boring operations
right at the machine with the easily understandable interactive
conversational guidance. The TNC 310 can control up to 4 axes.
Instead of the fourth axis, you can also change the angular position
of the spindle under program control.
Keyboard and screen layout are clearly arranged in a such way that
the functions are fast and easy to use.
Programming: HEIDENHAIN conversational format
HEIDENHAIN conversational programming is an especially easy
method of writing programs. Interactive graphics illustrate the
individual machining steps for programming the contour. Workpiece
machining can be graphically simulated during test run.
You can enter a program while the control is running another.
Compatibility
The TNC can execute all part programs that were written on
HEIDENHAIN controls TNC 150 B and later.
In addition, the TNC can also run programs with functions that
cannot be programmed directly on the TNC 310 itself, such as:
■ FK free contour programming
■ Contour cycles
■ ISO programs
■ Program call with PGM CALL
1
.1
The
TNC 31
0
1 Introduction