HEIDENHAIN TNC 310 (286 140) - Manual (Page 234)

14 Tables and Overviews 222
14.1 Gener
al User P
ar
a
met
ers
14.1 Gener
al User P
ar
a
met
ers
3-D Touch Probes
Probing feed rate for triggering touch probes
MP6120
8
0 to 3000 [mm/min]
Maximum traverse to first probe point
MP6130
0.001 to 30 000 [mm]
Safety clearance to probing point during automatic measurement
MP6140
0.001 to 30 000 [mm]
Rapid traverse for triggering touch probes
MP6150
1 to 30 000 [mm/min]
Measure center misalignment of the stylus when calibrating a triggering touch probe
MP6160
No 180° rotation of the 3-D touch probe during calibration: 0
M function for 180° rotation of the touch probe during
calibration: 1 to 88
TNC displays, TNC editor
Programming station
MP7210
TNC with machine: 0
TNC as programming station with active PLC: 1
TNC as programming station with inactive PLC: 2
Acknowledgment of POWER INTERRUPTED after switch-on
MP7212
Acknowledge with key: 0
Acknowledge automatically: 1
Dialog language
MP7230
German: 0
English: 1
Configure tool tables
MP7260
Inactive: 0
Number of tools per tool table: 1 to 254