HEIDENHAIN TNC 310 (286 140) - Manual (Page 4)

Contents
I HEIDENHAIN TNC 310
TNC Models, Software and
Features
This manual describes functions and features provided by
the TNCs with the following NC software numbers.
TNC Model NC Software No.
TNC 310 286 140-xx
TNC 310 M 286 160-xx
The machine tool builder adapts the useable features of the
TNC to his machine by setting machine parameters. Some
of the functions described in this manual may not be
among the features provided by the TNC on your machine
tool.
TNC functions that may not be available on your machine
include:
■ Probing function for the 3-D touch probe
■ Rigid tapping cycle
■ Boring cycle
■ Back boring cycle
Please contact your machine tool builder to become familiar
with the individual implementation of the control on your
machine.
Many machine manufacturers, as well as HEIDENHAIN,
offer programming courses for the TNCs. We recommend
these courses as an effective way of improving your
programming skill and sharing information and ideas with
other TNC users.
Location of use
The TNC complies with the limits for a Class A device in
accordance with the specifications in EN 55022, and is
intended for use primarily in industrially-zoned areas.