TA Triumph-Adler CX 8682 - Manual (Page 16)

CHAPTER 2 NAMES OF PARTS
2-6
(Inch)
(Metric)
● Auto roll over function
If paper of the same size is set in multiple paper sources, when paper
runs out in a paper source during copying, another paper source will
be automatically selected and copying will continue. If an optional roll
unit is installed, the unit can also be used for this function similarly to
the standard roll units.
* This function can be enabled or disabled by using “
$ Auto roll over”
of the default setting. (Page 7-3)
● Auto clear function
When one minute elapses after a copy run is complete, the machine
will automatically return to the initial settings.
* This function can be enabled or disabled by using “
7 Auto clear”.
(Page 7-2)
* The time for this function can be set by using “ 9 Timer set”. (Page
7-2)
(3) Message display
1 Indicates the status of the machine and copying.
2 Indicates the copy mode.
“APS”: Auto paper selection mode
“AMS”: Auto zoom mode
3 Indicates the type of originals.
“Normal original”, “Text” or “Photo”
4 Indicates the magnification ratio.
5 Indicates the number of copies.
6 Indicates the paper material.
“Plain” (“Bond paper”), “Vellum “, “Film” or “Custom”
7 Indicates the paper size and paper sources.
● Currently set copier features and adjustment features
8 Image shift setting
9 Margin copy setting
0 Border erase setting
! Mirror setting
@ Image rotation setting
# Inclination adjustment
$ Copy size fine adjustment
% Fixing temperature fine adjustment