TA Triumph-Adler CX 8682 User Manual
Page 51
CHAPTER 6 CONVENIENT FUNCTIONS
6-5
3
5
4
(Inch)
(Metric)
(Inch)
(Metric)
6
7
(Inch)
(Metric)
(Inch)
(Metric)
If only the number of copies is to be changed, press the
▼
or
▲
key to select “Additional copy”.
To change copy settings, press the
▼
or
▲
key to select
“AMS mode for all originals”.
Press the OK key.
• If “Additional copy” has been selected, proceed to the next
step.
• If “AMS mode for all originals” has been selected, proceed
to step 6.
Use the numeric keys to enter the number of copies.
Proceed to step 7.
Change copy settings.
Press the Start key. Copying will start.
(3) Deleting Image Data
If the Reset key is pressed when repeat copy has been set, the image
data in memory will be deleted.
To prevent image data from being deleted by mistake, a confirmation
screen for image deletion can be displayed. Set “
^
Delete memory”
of the default setting to “Check data of repeat copy”. (Page 7-6) If
“Check data of repeat copy” is set, when the Reset key is pressed
after repeat copy has been set, the confirmation screen shown below
will appear.
1
Press the
▼
or
▲
key to select a choice.
If “Cancel repeat copy(delete)” is selected, the image data will be
deleted and the machine will return to the initial state.
If “Continue repeat copy” is selected, copy settings will be cleared
but image data will not be cleared.
2
Press the OK key.