TA Triumph-Adler CX 8682 - Manual (Page 24)

CHAPTER 3 PREPARATIONS
3-8
1
2
3
(4) How to Use the Copy Tray Support Plate
Set the copy tray support plate based on the paper to be used for
copying.
Incline a copy tray support plate up and slide it to the size
indication on the size label of the copy tray.
After setting the copy tray support plate to the desired size,
return it to a horizontal state.
Set the other copy tray support plate to the same height in
the same procedure.
Depending on the paper to be used and the environment, the
support plate may not be contained at the position of the size
label. In this case, adjust the position of the copy tray support
plate upward or downward.