TA Triumph-Adler CX 8682 - Manual (Page 47)

6-1
CHAPTER 6 CONVENIENT FUNCTIONS
2
4
3
(Inch)
(Metric)
6
5
(Inch)
(Metric)
1
(Metric) (Inch)
1. Adjustment Functions
NOTE
Use these settings to temporarily adjust copy finishing. These settings
will be reset when the Reset key is pressed or the auto clear function is
activated to reset the machine to the initial state.
(1) Inclination adjustment
Use this function when the original image is inclined.
Press the Output Adj. key.
Press the ▼ or ▲ key to select “Adj.incline”.
Press the OK key.
Press the O or P key to set the angle for correction.
The angle can be set to the right or left between 0.0˚ to 1.0˚
in 0.1˚ increments or to 1.2˚ or 1.5˚.
Press the OK key.
Press the Output Adj. key. The machine will return to the
basic screen.
The symbol that indicates inclination adjustment will appear
at the bottom of the display.