TA Triumph-Adler CX 8682 - Manual (Page 86)

CHAPTER 8 TROUBLESHOOTING
8-4
1
2
5
4
6
3
7
CAUTION
Do not incinerate toner and toner containers. Dangerous
sparks may cause burn.
Remove the original loop guide and then turn the screws on
both sides of the toner replenishing slot according to the
marking position to open the toner replenishing slot.
Shake the replenishment toner bottle up and down 10 times,
and grasp it horizontally and shake it side to side 10 times.
Align the ▼ portion of the toner bottle with the pin 1 (metal
protrusion) of the opening to insert the bottle into the opening
as shown in the illustration.
While pressing the toner bottle down, turn it clockwise by 90
degrees. Toner will be replenished.
Tap the side of the toner bottle 7 or 8 times to drop the toner
remaining.
While pressing the toner bottle down, turn it to the original
position and gently remove it.
Close the toner replenishing slot and turn the toner
replenishing slot screws to the location shown in the
illustration to fix it. Then reattach the original loop guide. 8
Grasp the replenishment toner bottle upside down and tap
the bottom of the bottle 10 times.