TA Triumph-Adler CX 8682 - Manual (Page 73)

CHAPTER 7 MANAGEMENT AND SETTING
7-15
5
5
6
4
3
1
2
(Inch)
(Metric)
(Inch)
(Metric)
1
6
2
(Inch)
(Metric)
1
(Inch)
(Metric)
2
Press the ▼ or ▲ key to select “Back to machine default”.
Press the OK key. The machine will return to the machine
default setting screen.
@ @ @ @ @ Custom paper adj.
Press the ▼ or ▲ key to select a paper material.
Press the OK key.
Press the ▼ or ▲ key to select the fixing temperature based
on each paper material.
Press the OK key.
Press the ▼ , ▲ , O , and P keys to set the copy size. For the
method of setting, see “ 0 Copy size adjustment” on page 7-
2.
Press the OK key. The machine will return to the machine
default setting screen.
# # # # # Standard size set
Press the ▼ or ▲ key to select the type of standard size.
For an inch machine, select “architecture” or “engineer”. For
a metric machine, select “A sizes” or “B sizes”.
Press the OK key. The machine will return to the machine
default setting screen.
$ $ $ $ $ Auto roll over
To enable auto roll change, press the ▼ or ▲ key to select
“ON”.
Press the OK key. The machine will return to the machine
default setting screen.