TA Triumph-Adler CX 8682 - Manual (Page 61)

CHAPTER 7 MANAGEMENT AND SETTING
7-3
@ Custom paper adj.
[Custom paper
material adj.]
Material, fixing temperature, and copy size for custom paper can be
set. These settings are associated with custom settings of copy size
and fixing temperature adjustment. Plain
145˚C, 155˚C, 165˚C
Vellum
165˚C, 175˚C, 185˚C
Film
150˚C, 160˚C, 170˚C
Copy size:
X (widthwise direction)
-3.0% to +3.0%
Y (lengthwise direction)
-3.0% to +3.0%
Vellum
165˚C
X:
±
0.0%
Y: ± 0.0%
# Standard size set Select the type of originals and paper to be used: “architecture” or
“engineering” [“A sizes” or “B sizes”]. This setting affects the standard
cut length and paper width and original width to be detected automati-
cally by this machine. Architecture/ engineer-
ing (A sizes/ B sizes) Architec-
ture (A
sizes)
$ Auto roll over If paper of the same size is set in multiple paper sources, when paper
in a paper source runs out during copying, another paper source will
be automatically selected and copying will continue. If “
2 Paper
working” is set to “ON”, however, auto roll over will not function
between different paper materials of the same size.
ON/OFF OFF
% Management #
[Management code
change]
The password for the default setting for manager can be changed.
* It is recommended to write the code down when it is changed. 0000 to 9999 4850
Setting item Details Selectable values Default Page
7-15
7-15
7-15
7-16