TA Triumph-Adler CX 8682 - Manual (Page 43)

CHAPTER 5 FUNCTIONAL COPYING
5-10
4
(Inch)
(Metric)
(Inch)
(Metric)
5
6
7
(Inch)
(Metric)
1
3
2
(Metric) (Inch)
The erase width setting will be displayed in the top line of the
message display.
• To change the preset value, press the
▼ or ▲ key to select
“Change”.
• To accept the value without change, ensure that “ON” is
selected.
Press the OK key.
• If “Change” has been selected, proceed to the next step.
• If “ON” has been selected, the machine will return to the
basic screen.
Use the numeric keys to enter the erase width.
Press the OK key.
The machine will return to the basic screen.
(4) Mirror mode
This mode makes copies that are mirror images of the original in the
side to side direction.
Press the Editing key.
Press the ▼ or ▲ key to select “Mirror”.
Press the OK key.