TA Triumph-Adler CX 8682 - Manual (Page 56)

CHAPTER 6 CONVENIENT FUNCTIONS
6-10
3
2
6
4
1
(Inch)
(Metric)
5
7
(Inch)
(Metric)
(Metric) (Inch)
(2) Program Recall
Press the Program Recall key.
Press the ▼ or ▲ key to select a program number to be
recalled from “Job Program #1” to “Job Program #10”
NOTE
• If check of registered copy conditions is not needed, enter the program
number using a numeric key. (For “Job Program #10”, press the 0
key.) The program will be recalled and the machine will return to the
basic screen.
Press the OK key.
Registered copy conditions will be displayed. To check the
details of registered copy conditions, proceed to the next
step. Otherwise, proceed to step 5.
Press the O or P key to switch the screen to check the
details of registered conditions.
Press the OK key.
A confirmation screen for program recall will appear.
Press the ▼ or ▲ key to select “Yes”.
Press the OK key.
The program will be recalled and the machine will return to
the basic screen.
Copy conditions can be changed.