TA Triumph-Adler CX 8682 - Manual (Page 31)

CHAPTER 4 BASIC COPYING
4-7
2
3
4
5
1
2
3
4
(Inch)
(Metric)
(Inch)
(Metric)
(Inch)
(Metric)
(Inch)
(Metric)
(Metric) (Inch)
Press the ▼ or ▲ key to select “Standard cut” [“Standard
sizes”].
Press the OK key.
Press the ▼ or ▲ key to select the desired cut length.
Press the OK key.
The machine will return to the basic screen.
(3) Numeric key input
Enter the desired cut size using the numeric keys. For paper in the
bypass table, cut cannot be selected.
Press the Cut Size key.
Press the ▼ or ▲ key to select "# keys".
Use the numeric keys to enter the desired cut size.
The cut size that can be entered is 11" to 237" [279 to 6,000
mm].
NOTE
The cut size can be changed by using the numeric keys after pressing
the Cut Size key.
Press the OK key.
The machine will return to the basic screen. Confirm that the
selected size is displayed.