TA Triumph-Adler CX 8682 - Manual (Page 28)

CHAPTER 4 BASIC COPYING
4-4
(Inch)
(Metric)
(Inch)
(Metric)
(Metric) (Inch)
(Inch)
(Metric)
3. Copy Modes
This machine provides three copy modes: “APS”, “AMS”, and
“Manual”. The copy mode selected in the initial state can be changed
using “
0 Auto select set” of the default setting. (Page 7-5)
(1) APS mode
When an original is set, a paper source of the size specified based on
the original size and the magnification ratio will be automatically
selected. To select the APS mode, press the APS/AMS key to display
“APS”.
NOTE
• The bypass cannot be selected automatically.
• To press the Paper Source key to enter the AMS mode when the
APS mode has been set, set the “AMS mode” of the default setting
to “ON”. (Page 7-5)
• If “ 1 Auto rotation mode” of the default setting has been set to “ON”,
when the orientation of the original is different from that of the paper,
the image will be automatically rotated counterclockwise by 90 degrees
and copied.
(2) AMS mode
When an original is set, the magnification ratio will be automatically
set based on the selected paper size. To select the AMS mode, press
the APS/AMS key to display “AMS”.
NOTE
• If the bypass is selected, the magnification ratio will be 100%.
• If “
1 Auto rotation mode” of the default setting has been set to
"OFF", the magnification ratio will be automatically set based on the
width of the original and the width of the selected paper size.
• If “ 1 Auto rotation mode” of the default setting has set been to
“ON”, when the orientation of the original is different from that of the
paper, the image will be automatically rotated counterclockwise by
90 degrees and copied.
(3) Manual mode
A paper source and a magnification ratio are selected manually for
copying.