TA Triumph-Adler CX 8682 - Manual (Page 63)

CHAPTER 7 MANAGEMENT AND SETTING
7-5
● Items for manager only
Setting item Details Selectable values Default Page
9 Standard drawer Default paper source can be selected. Paper source 1 (only if
an optional roll unit is
installed)/ paper source
2/ paper source 3/
bypass Paper
source 2
0 Auto select set Default copy mode (“APS”, “AMS”, or “Manual”) can be selected. APS/ AMS/ Manual Manual
! AMS mode If a paper source is specified when the APS mode has been set,
copying with a preset magnification ratio or the AMS mode will be
selected. Whether copying with a preset magnification ratio (“OFF”) or
the AMS mode (“ON”) is selected can be specified. ON/OFF OFF
@ Method copy start If “Start key” is selected, scanning of original will start when the Start
key is pressed after an original has been set. If “Auto start” is selected,
scanning of original will start automatically when an original is set. Auto start/
Start key Auto start
# Start late time If “ @ Method copy start” is set to “Auto start”, the time between setting
of original and start of copying can be set.
0.5 sec./ 1 sec./ 2 sec./
3 sec./ 4 sec./ 5 sec. 0.5 sec.
$ Paper cut [Select
cut. Method]
Default paper cut size can be selected.
“User 1” and “User 2” are the lengths that have been set by “
3 Cut
size register”.
For A sizes (metric
machine)
Synchronized cut/ 1189
mm/ 841 mm/ 594 mm/
420 mm/ 297 mm/ User
1, 2
For B sizes (metric
machine)
Synchronized cut/ 1030
mm/ 728 mm/ 515 mm/
364 mm/ User 1, 2
Architecture (inch
machine)
Synchronized cut/ 12.0"/
18.0"/ 24.0"/ 36.0"/
48.0"/ User 1, 2
Engineering (inch
machine)
Synchronized cut/ 11.0"/
17.0"/ 22.0"/ 34.0"/
44.0"/ User 1, 2
Synchro-
nized cut
7-19
7-19
7-19
7-20
7-20
7-20