TA Triumph-Adler CX 8682 - Manual (Page 25)

4-1
CHAPTER 4 BASIC COPYING
CAUTION
If the copier will not be used for a short period of time
(overnight, etc.), turn the main switch OFF (O). If it will not be
used for an extended period of time (vacations, etc.), remove
the power plug from the outlet for safety purposes during the
time the copier is not in use.
(Inch)
(Metric)
(Metric) (Inch)
1. Before starting copying
(1) Initial state
When the main power switch of this machine is turned on ( ❘ ) (and
warm up is complete, the machine is ready to copy. This state is
called initial state and the screen displayed in this state is called basic
screen.
The machine also enters the initial state when the auto clear function
is activated or the Reset key is pressed.
Be sure to ensure that the machine is in the initial state before
copying.
When the auto clear function is activated, however, the exposure
display will not return to the initial setting.
(2) When the Energy Saver indicator is lit
When the Energy Saver indicator is lit and other indicators are off on
the operation panel, the machine is in the energy saver mode. When
the Energy Saver key is pressed, warm up will start.
(3) When using a key counter (option)
If the message “Insert key counter.” appears, a key counter must be
set in this machine.
Insert the key counter all the way into the key counter insert slot
located on the right of the main body.