Canon EOS C200 EF Cinema Camera and 24-105mm Lens Kit - Manual (Page 118)

Using the Optional RC-V100 Remote Controller
118
Using the Optional RC-V100 Remote Controller
You can connect the optional RC-V100 Remote Controller to the camera’s REMOTE terminal in order to control
the camera (including advanced recording functions) from a distance. The remote controller lets you turn the
camera on, navigate the menus and remotely control the aperture and shutter speed, change picture-related
settings like the knee and sharpness, and more.
Use the cable supplied with the remote controller to connect it to the camera. For details on how to connect and
use the remote controller, refer to its instruction manual.
1 Turn off the camera and connect the optional RC-V100 Remote Controller to the camera.
2 Turn on the camera and open the [REMOTE Term.] submenu.
> [ B ! System Setup] > [REMOTE Term.]
3 Select [RC-V100 (REMOTE A)] and then press SET.
Options
[RC-V100 (REMOTE A)]: Select this option to use the optional RC-V100 Remote Controller.
[Standard]: Select this option to use commercially available remote controls.
NOTES NOTES
• The AGC button, AUTO KNEE button and AF button on the remote controller will not operate the camera.
• The AUTO IRIS button on the remote controller will operate the camera only when a compatible EF lens
( A 213) is attached to the camera.
• The ZOOM dial on the remote controller can operate the lens only when a compatible EF Cinema lens
( A 213) is attached to the camera.
• Adjusting picture-related settings with the remote controller can be performed only when the detailed settings
were activated ( > [ ! Custom Picture/HDR] > [Activate Other Settings] is set to [On], A 123).
Operating modes:
Remote cable
(supplied with the
RC-V100)
To the RC-V100’s
REMOTE A terminal