Canon EOS C200 EF Cinema Camera and 24-105mm Lens Kit - Manual (Page 125)

125
Custom Picture Settings
Renaming Custom Picture Files
1 Select a custom picture file ( A 123).
2 Open the [Rename] submenu.
> [ ! Custom Picture/HDR] > [File] > [Rename]
3 To change the file name, select [Input] and then press the joystick.
• Enter the desired file name (up to 8 characters) using the keyboard screen ( A 35).
4 Select [OK] and then press the joystick.
Protecting Custom Picture Files
Protecting a custom picture file prevents its settings from being accidentally changed.
1 Select a custom picture file ( A 123).
2 Open the [Protect] submenu.
> [ ! Custom Picture/HDR] > [File] > [Protect]
3 Select [Protect] and then press the joystick.
• In the custom picture file selection screen, i will appear next to the file name.
• To remove protection settings, select [Unprotect] instead.
Copying Custom Picture Files
You can transfer custom picture files between the camera and SD card B.
Copying a File from the Camera to SD Card B
1 Select a custom picture file ( A 123).
2 Open the [Copy to SD Card B] submenu.
> [ ! Custom Picture/HDR] > [File] > [Copy to SD Card B]
3 Select the destination file and then press the joystick.
• Select an existing custom picture file to overwrite it or, if this option is available, select [New File] to save the
settings as a new custom picture file on SD card B.
4 Select [OK] and then press the joystick.
• The file on SD card B will be overwritten or a new file will be created on the SD card.
5 When the confirmation message appears, press the joystick.
Replacing a File in the Camera with a File on SD Card B
1 Select the custom picture file that you wish to replace ( A 123).
2 Open the [Load from SD Card B] submenu.
> [ ! Custom Picture/HDR] > [File] > [Load from SD Card B]
3 Select the file with the settings that you want to replicate and then press the joystick.
4 Select [OK] and then press the joystick.
• The file in the camera will be overwritten by the one on SD card B.
5 When the confirmation message appears, press the joystick.