Canon EOS C200 EF Cinema Camera and 24-105mm Lens Kit - Manual (Page 180)

Menu Options
180
1
mode only.
2 The default value depends on the country/region or purchase.
3 Appears on page # in mode.
4
Appears on page $ in mode.
[ ¥ My Menu] ( mode only)
%
[LED]
1, 4
( A 57)
[Tally Lamp (Front)],
[Tally Lamp (Rear)],
[CFast Access LED],
[SD Card Access LED],
[
(Ethernet)]
[On], [Off]
These settings determine whether the following LEDs and indicators will illuminate.
[Tally Lamp (Front)], [Tally Lamp (Rear)]: The tally lamps on the camera. Note that regardless of this
setting, when the camera is turned off, the tally lamps will illumiate in red momentarily after the
Q button is pressed.
[CFast Access LED], [SD Card Access LED]: The SD card access indicators and the CFast card access
indicator when the camera is accessing the respective recording media.
[
(Ethernet)]: The (Ethernet) indicator when the camera is accessing a wired network.
[Fan] ( A 63)
[Mode] [Automatic], [Always On]
[Fan Speed (Always)] [High], [Low]
[Review Recording] [Entire Clip] , [Last 4 sec] ( A 109)
[GPS Auto Time] [On], [Off] ( A 108)
&
[Retract Lens]
1
[On] , [Off]
When one of the following lenses is attached to the camera and the focus mode switch on the lens is
set to AF, if this setting is set to [On], the lens will retract fully when the camera is turned off.
• EF 40mm f/2.8 STM
• EF-S 24mm f/2.8 STM • EF 50mm f/1.8 STM
[Reset Hour Meter]
1
–
The camera has two “hour meters” – the first keeps track of total operation time and the second
keeps track of operation time since the last time the second hour meter was reset with this function.
[Firmware]
1
[Camera] –
Displays the current firmware version of the camera. This setting is usually unavailable.
[Lens] – ( A 38)
Menu item Setting options and additional information
!
[CAMERA-1 Edit] [Register], [Move], [Delete], [Reset All], [Rename]
"
[CAMERA-2 Edit] [Register], [Move], [Delete], [Reset All], [Rename]
#
[CAMERA-3 Edit] [Register], [Move], [Delete], [Reset All], [Rename]
$
[CAMERA-4 Edit] [Register], [Move], [Delete], [Reset All], [Rename]
%
[CAMERA-5 Edit] [Register], [Move], [Delete], [Reset All], [Rename]
Menu item Setting options and additional information