Canon EOS C200 EF Cinema Camera and 24-105mm Lens Kit - Manual (Page 35)

35
Using the Menus
Rearranging Menu Settings
1 Open the My Menu [Move] screen.
> [ ¥ My Menu] * > [Edit] > [Move]
* Each My Menu set appears on a different page. Select the page that corresponds to the desired set.
2 Push the joystick to select the setting you want to move and then press the joystick.
• The ] icon will appear next to the setting you selected to move.
3 Push the joystick up/down to move the setting to the desired position and then press the joystick.
Removing Menu Settings
1 Open the My Menu [Delete] screen.
> [ ¥ My Menu] * > [Edit] > [Delete]
* Each My Menu set appears on a different page. Select the page that corresponds to the desired set.
2 Push the joystick to select the setting you want to remove and then press the joystick.
3 Select [OK] and then press the joystick twice.
Resetting the My Menu Submenu
1 Reset all the menu settings registered to the currently selected My Menu set.
> [ ¥ My Menu] * > [Edit] > [Reset All]
* Each My Menu set appears on a different page. Select the page that corresponds to the desired set.
2 Select [OK] and then press the joystick twice.
Renaming the Selected My Menu Set
You can give each of the 5 My Menu sets a more descriptive name to make them easier to identify.
1 Open the My Menu [Rename] screen.
> [ ¥ My Menu] * > [Edit] > [Rename]
* Each My Menu set appears on a different page. Select the page that corresponds to the desired set.
2 Enter the desired name (8 characters long) using the keyboard screen ( A 35).
3 Select [OK] and then press the joystick.
Using the Virtual Keyboard Screen
When the LCD monitor is attached to the camera and the LCD screen is used, the keyboard screen will
appear on the screen. The text entry field will have 3 or 6 lines, depending on the function.
1 Use the joystick to select a character and then press the
joystick to add it.
• Push the joystick up/down/left/right to select the desired
character and press the joystick to enter it. Use the arrows (

/

/
 /  ) to change the position of the cursor and the backspace
character ( ) to delete the last character entered.
• Repeat this step as necessary to enter the desired text.
• Some characters will not be available, depending on the
function.
2 After entering the desired text, select [OK] and then press the joystick to close the keyboard
screen.
Current character / Character limit