Canon EOS C200 EF Cinema Camera and 24-105mm Lens Kit - Manual (Page 152)

Connecting to a Wi-Fi Network
152
Saving the Configuration
1 Review the access point’s configuration and then press the joystick.
• The first screen shows the type of connection and the access point’s SSID and channel. Push the joystick
left/right to review additional settings before pressing the joystick.
2 To change the [Network Configuration Name], select [Input] and then press the joystick.
• If you wish, you can give the network configuration profile a more descriptive name to make it easier to
identify. Enter the desired name using the keyboard screen ( A 35).
3 Select [OK] and then press the joystick to save the network configuration.
4 When the confirmation screen appears, press the joystick.
Connecting in Infrastructure Mode
1 Open the connection method selection submenu.
> [ ! Network Settings] > [Connection Settings] > select the desired configuration number* >
[Edit]
* You can save up to 4 network configuration profiles in the camera. Push the joystick up/down to select the configuration number.
2 Select [Infrastructure] and then press the joystick.
3 Select the desired network setup method and then press the joystick.
• Continue the setup with the procedure corresponding to the method you wish to use (see the reference
pages below).
[WPS: Button] (
A 153)
[WPS: PIN Code] ( A 153)
[Search for Access Points] ( A 154)
[Manual] ( A 155)