Canon EOS C200 EF Cinema Camera and 24-105mm Lens Kit - Manual (Page 159)

159
Browser Remote: Controlling the Camera from a Network Device
Starting Browser Remote
After connecting the camera to the network, you can start the Browser Remote application on the Web browser*
of any network device** connected to the same network. You can check the Browser Remote settings on the
status screen (
A 181).
* A Web browser that supports JavaScript and is enabled to accept cookies is required.
** For details about compatible devices, operating systems, Web browsers, etc., please visit your local Canon website.
Preparations on the camera
1 Set an assignable button to [Status] in advance ( A 119).
2 Connect the camera to the desired network ( A 157).
• Use a Camera Access Point connection ( A 151) or Ethernet connection ( A 156).
3 Activate Browser Remote on the camera.
> [ ! Network Settings] > [Activate] > [Browser Remote]
• With Camera Access Point connections, the camera will start functioning as a wireless access point. With
Ethernet connections, connect the camera to the desired network using an Ethernet cable.
• and the connection type icon will appear at the top of the screen. When the icons turn white, the
camera is ready to accept commands from the Browser Remote application.
4 If necessary, you can check the network settings while Browser Remote is activated.
• Press the assignable button to open the status screens and push the joystick left/right to select the
[Network 1/4] status screen (for the SSID for Camera Access Point connections) and [Network 4/4] status
screen (for the URL for Browser Remote).
• Press the assignable button to close the status screen.
On the connected network device
1 Connect the network device to the camera.
• On Wi-Fi devices select the camera’s SSID (network name) in the Wi-Fi settings. With Infrastructure and
Ethernet connections, connect the device to the same access point as the camera.
2 Start the Web browser on the network device.
Operating modes: