Inserting a cfast card, Removing a cfast card, Inserting a cfast card 48 removing a cfast card 48 – Canon EOS C200 EF Cinema Camera and 24-105mm Lens Kit User Manual

Page 48

Advertising
background image

Preparing Recording Media

48

Inserting a CFast Card

1 Slide the CFast card slot cover switch in the direction of

the arrow.

• The CFast card slot cover will open.

2 Insert the CFast card straight, with the label facing the SD

card slots, all the way into the slot.

3 Close the CFast card slot cover.

• Do not force the cover closed if the CFast card is not

correctly inserted.

CFast card access indicator

If you set

>

[

B

%

System Setup]

>

[LED]

>

[CFast

Access LED] to [Off], the CFast card access indicator will not
illuminate.

Removing a CFast card

1 Wait until the CFast card access indicator is off or is

illuminated in green.

2 Slide the CFast card slot cover switch in the direction of the

arrow.

• The CFast card slot cover will open.

3 Make sure the CFast card access indicator is off and then

push the CFast card release button.

4 Pull out the CFast card and close the CFast card slot cover.

IMPORTANT

• Observe the following precautions while the CFast card access indicator is illuminated in red. Failure to do so

may result in permanent data loss.
- Do not disconnect the power source or turn off the camera.
- Do not open the cover of the CFast card slot being accessed.

CFast

indicator

CFast card status

Red

Accessing the CFast card.

Green

Recording/playback is possible.

Off

A CFast card is not inserted.

CFast indicator

Advertising
This manual is related to the following products: