Canon EOS C200 EF Cinema Camera and 24-105mm Lens Kit User Manual
Page 127
127
Custom Picture Settings
[
!
Custom Picture/HDR
]
>
[Other Settings] Submenu (Detailed Settings)
Submenu levels / Menu items
Options / Additional information
[Black]
[Master Pedestal]
–50 to 50
(±0)
Increases or decreases the black level. Higher settings will make dark areas brighter but decrease
contrast. When [Gamma] is set to one of the Canon Log settings, this setting has no effect on the
picture.
[Master Black Red],
[Master Black Green],
[Master Black Blue]
–50 to 50
(±0)
These settings correct the color cast in blacks. When [Gamma] is set to one of the Canon Log
settings, these settings have no effect on the picture.
[Black Gamma]
[Level]
–50 to 50
(±0)
[Range], [Point]
–20 to 50
(±0)
These settings control the lower part of the gamma curve (dark areas of the image). When [Gamma]
is set to one of the Canon Log settings or [Wide DR], these settings are not available.
[Level]: Raises or lowers the lower part of the gamma curve.
[Range]: Selects the adjustment range from the selected [Point].
[Point]: Determines the shape of the lower part of the gamma curve.
[Low Key Satur.]
[Activate]
[On],
[Off]
Set this setting to [On] to enable the adjustment of color saturation in dark areas with the [Level]
setting.
[Level]
–50 to 50
(±0)
Specifies how saturated colors are in dark areas.
[Knee]
[Activate]
[On], [Off]
Set this setting to [On] to enable the adjustment of the knee point with the following settings. When
[Gamma] is set to one of the Canon Log settings or [Wide DR], the [Knee] settings are not available.
Input
Output
[Point]
[
Range
]
[Level]