EastWest Hollywood Orchestra Opus Edition Virtual Instrument Plug-In (Download) - Manual (Page 211)

HOLLYWOOD ORCHESTRA OPUS EDITION C O N T E N T S <
CHAPTER 6: MIX 211 C H A P T E R <
Drive Set the amount of drive applied to the signal from 0% (none) and 100% (full).
Lows Boost low frequency between 0% (none) and 100% (full).
Highs Boost high frequency between 0% (none) and 100% (full).
Mix The signal is completely dry at 0%, and wet at 100%.
Output Gain Boost (+24 db) or attenuate (-60 db) the audio output gain.
Fuzz
Add an aggressive style of distortion to your signal, by pushing it into clipping territory.
CONTROLS
Input Gain Boost (+24 db) or attenuate (-60 db) the audio input gain.
Boost Boost the signal level to increase the effect.
Fuzz Overdrive your signal to clipping between 0% (none) and 100% (full).
Tone Change the tone color from dull (0%) to bright (100%).
Mix The signal is completely dry at 0%, and wet at 100%.
Output Gain Boost (+24 db) or attenuate (-60 db) the audio output gain.
Legend Amp
This effects processor provides distortion and re-amping characteristics, allowing
you to customize Tonestack and Cabinet combinations..
Select between 6 TONESTACK PRESETS by clicking in the drop-down menu. These
presets alter the frequency response of the tone controls (bass, mid, treble) based
on the model they emulate. Select between 79
CABINET PRESETS by clicking in the
drop-down menu. To select an item, click on its name in the list, which display the
name of an amp followed by the name of a microphone it’s paired with. For example,
selecting “Marshall EV RE-20” gives you a simulation of an Electrovoice RE20
microphone run through a Marshall amp. A check-mark in the list indicates which
item is the current selection.
Once you’ve selected a Tonestack and Cabinet combination, you can use the other con-
trols, described below, to customize the audio output.