FUJITSU Disk Storage System DX60 - Manual (Page 113)

Appendix A Event Notification Message List
A.2 Message List
ETERNUS DX60 S2 Disk storage system User’s Guide -Operation-
113
Copyright 2012 FUJITSU LIMITED P3AM-5512-03ENZ0
I 00000036 9 Host response registered This message is
notified when "Host
Response
Changed" is
enabled for Informa-
tional Level in the
event notification
setting.
(A)Byte-0 of Inquiry Response
(B)Inquiry VPD ID Type
(C)Inquiry Standard Data Version
(D)Command Timeout Interval
(E)Load Balance Response
(F)Reservation Conflict Response for Test Unit Ready
(G)Host Specific Mode
(H)Asymmetric/Symmetric Logical Unit Access
(I)LUN Mapping Changes
(J)LUN Capacity Expansion
(K)Vendor Unique Sense Code
(L)Sense Data Conversion
No. Name (A) (B) (C) (D) (E) (F) (G) (H) (I) (J)
0x$x $y $a $b $c $d sec. $e $f $g $h $i $j
0x$x $y $a $b $c $d sec. $e $f $g $h $i $j
:
0x$x $y $a $b $c $d sec. $e $f $g $h $i $j
:
No. Name (I) (J) (K) (L)
0x$x $y $i $j $k $l
0x$x $y $i $j $k $l
$A -> $B
:
0x$x $y $i $j $k $l
:
A host response is registered.
$x: Host response number
$y: Host response name
$a: Byte-0 of Inquiry Response
$b: Inquiry VPD ID Type
$c: Inquiry Standard Data Version
$d: Command monitoring time
$e: Overload response status
$f: Reservation Conflict Response for Test Unit Ready
$g: Specific host operation
$h: Logical Unit access topology
$i: Add or remove volumes
$j: Change volume capacity
$k: Vendor Unique Sense Code
$l: Sense code conversion pattern (When "Customize" is selected,
the conversion source sense and converted sense is dis-
played in "$A -> $B" format.
$A: Conversion source sense (SK/ASC/ASCQ)
$B: Converted sense (SK/ASC/ASCQ))
I 00000037 9 LUN mapping registered (CM#%a port#%b Host Affinity Disable) This message is
notified when "LUN
Mapping Changed"
is enabled for Infor-
mational Level in
the event notifica-
tion setting.
LUN Volume
$c $d:$e
$c $d:$e
$c $d:$e
:
A LUN mapping (with host affinity disabled) is registered.
%a: CM number (0 – 1)
%b: Device number (0 – 1)
$c: Logical unit number
$d: Volume number
$e: Volume name
Event type
and event
code
SNMP
Trap
Upper: Message
Remarks
Middle: Detail information
Trap
No.
Lower: Description