FUJITSU Disk Storage System DX60 - Manual (Page 90)

Appendix A Event Notification Message List
A.1 Message Format
ETERNUS DX60 S2 Disk storage system User’s Guide -Operation-
90
Copyright 2012 FUJITSU LIMITED P3AM-5512-03ENZ0
A.1.2 SNMP
The ETERNUS DX Disk storage system supports SNMPv1.
To monitor the ETERNUS DX Disk storage system using SNMP Trap, software that can receive
and analyze SNMP Traps must be used on the network.
This section describes the type and the notification format of Traps. For details on the messages
that are notified by SNMP Trap, refer to
"A.2 Message List" (page 93) .
For the display contents of events (SNMP Traps) when using the server management software
"ServerView Operation Manager" for monitoring the ETERNUS DX Disk storage system, refer to
"Appendix B Event (SNMP Trap) Display When Using ServerView Operation Manager" (page
119)
.
■ Trap type
There are two types of Traps: Generic Trap (standard Trap) and Specific Trap (extended Trap).
Generic Trap is a Trap that is defined by the SNMP protocol. Specific Trap is a Trap that has
been created specifically for the ETERNUS DX Disk storage system. The ETERNUS DX Disk
storage system supports the following types of Traps:
●
Generic Trap (standard Trap)
●
Specific Trap (extended Trap)
Trap No. Name Description
0 coldStart For an ETERNUS DX Disk storage system, this Trap is
sent when the controller starts up and restarts and
when SNMP is set.
4 authenticationFailure An unauthorized access occurred.
6 enterpriseSpecific Extended Trap
Trap No. Name Description
2 fjdarye101ItemFault This Trap is sent to notify that a component fails
or degrades.
5 fjdarye101ItemWarning This Trap is sent to notify that a component
requires preventive maintenance.
6 fjdarye101SensorStatusChange This Trap is sent to notify that a temperature
error is detected.
7 fjdarye101MaintenanceRequired This Trap is sent to notify that an event requires
maintenance or preventive maintenance.
9 fjdarye101Information This Trap is sent to notify Information-level
events.
22 fjdarye101ItemFaultToNormal This Trap is sent to notify that an event notified
by Trap No. 2 returns to normal status.
25 fjdarye101ItemWarningToNormal This Trap is sent to notify that an event notified
by Trap No. 5 returns to normal status.
26 fjdarye101SensorStatusChangeToNormal This Trap is sent to notify that an event notified
by Trap No. 6 returns to normal status.