FUJITSU Disk Storage System DX60 - Manual (Page 63)

Chapter 5 Installing Optional Products
5.1 Installing Disks
ETERNUS DX60 S2 Disk storage system User’s Guide -Operation-
63
Copyright 2012 FUJITSU LIMITED P3AM-5512-03ENZ0
5
Install the new disk.
5-1 Press the catch on the disk lock lever to unlock it.
5-2 Insert the disk all the way into in the slot, making sure that it is firmly seated and
keeping the lock lever open.
5-3 Swing the lock lever in the direction of the arrow, until the lock clicks shut.
5-4 Check that the newly installed disk’s DISK READY/FAULT LED lights up green after
approximately 30 seconds.
IMPORTANT
• Hold the disk with both hands to protect against jarring.
• Insert the disk until the lock lever hooks reach the slot
protrusions.
IMPORTANT
Make sure that the lock lever hooks have engaged the slot
protrusions.
Catch
Lock lever
1
2
Lock lever
Hook
Slot
protrusion
Hook
Slot
protrusion
Lock lever hooks
have not engaged
Lock lever hooks
have engaged