Figure 2.2, Figure 2.3 – FUJITSU Disk Storage System DX60 User Manual
Page 31
Chapter 2 Standard Operations
2.1 Powering On and Off
ETERNUS DX60 S2 Disk storage system User’s Guide -Operation-
31
Copyright 2012 FUJITSU LIMITED
P3AM-5512-03ENZ0
●
For 2U power distribution unit
Figure 2.2
ON position (marked "|") of the main line switches on a 2U power distribution unit
■
To switch to OFF
Turn the main line switch of the power distribution unit to the "Off" position (marked "O").
●
For 1U power distribution unit
Figure 2.3
OFF position (marked "O") of the main line switches on a 1U power distribution
unit
Main line switch
For normal operation, there is no need to the turn the main line switch to
the "Off" position. If the ETERNUS DX Disk storage system must be turned
off, such as before any inspections of power supply devices are performed,
turn off the ETERNUS DX Disk storage system by using the procedure
described in
"2.1.3 Powering Off" (page 34)
and turn the main line to the
"Off" position.
Main line switch