FUJITSU Disk Storage System DX60 - Manual (Page 58)

Chapter 5 Installing Optional Products
5.1 Installing Disks
ETERNUS DX60 S2 Disk storage system User’s Guide -Operation-
58
Copyright 2012 FUJITSU LIMITED P3AM-5512-03ENZ0
5.1.3 Disk Handling Instructions
■ About condensation
■ About static electricity
CAUTION
Do
• When moving a disk from a cold place, such as an un-conditioned
store house in winter, to a warmer places such as an air-conditioned
room, the severe temperature change may result in condensation
forming.
To avoid this, allow the packed disks sufficient time in the warmer
place (one hour for each 15
°C of temperature difference) to adapt to
the new temperature.
CAUTION
Do Not
• Do not touch the surface of the board of the disks.
Do
• When handling disks, make sure to wear a wrist strap or touch a metal
part to discharge the human body's natural static electricity. Failure to
discharge static electricity may cause device failure.
• Leave the disk in its package until ready to install it.