FUJITSU Disk Storage System DX60 - Manual (Page 36)

Chapter 2 Standard Operations
2.2 Attaching and Removing the Flange Cover
ETERNUS DX60 S2 Disk storage system User’s Guide -Operation-
36
Copyright 2012 FUJITSU LIMITED P3AM-5512-03ENZ0
■ Procedure for attaching the flange cover
Attach the flange cover in the following order.
Procedure
1
Slide the tab inside the top of the flange cover over the top-left corner of the
controller enclosure.
2
Tighten the thumb screw to fasten the flange cover.
End of procedure
■ Procedure for removing the flange cover
Loosen the thumb screw to remove the flange cover.
IMPORTANT
When fitting the flange cover, be careful not to touch the power
switch (
).
Flange cover
Thumb screw