FUJITSU Disk Storage System DX60 - Manual (Page 72)

Chapter 5 Installing Optional Products
5.2 Installing Drive Enclosures
ETERNUS DX60 S2 Disk storage system User’s Guide -Operation-
72
Copyright 2012 FUJITSU LIMITED P3AM-5512-03ENZ0
A screen to show how to install the drive enclosure appears.
5
Connect the miniSAS cable (for drive enclosures).
5-1 Connect the DI (OUT) port at controller 0 (CM#0) of controller enclosure, to the DI (IN)
port at expander 0 (EXP#0) of the drive enclosure 1 with the miniSAS cable.
(1) Connect the plug to be connected to DI (OUT) port, to the DI (OUT) port of the
Controller 0 (CM#0).
Remove the port cover from the DI (OUT) port before inserting the plug.
Controller enclosure