FUJITSU Disk Storage System DX60 User Manual
Page 75
Chapter 5 Installing Optional Products
5.2 Installing Drive Enclosures
ETERNUS DX60 S2 Disk storage system User’s Guide -Operation-
75
Copyright 2012 FUJITSU LIMITED
P3AM-5512-03ENZ0
6-2
Fix the plug of the power cord with the release tie.
Wrap the release tie around the power cord. The release tie can be fastened from
either side.
7
Connect the power cords to the socket.
Connect the plug at the other end of each power cord to the socket.
The drive enclosure turns on.
8
Check that the drive enclosure's POWER LED and READY LED are on.
9
Click the [Next>] button.
The drive enclosure recognition process is performed. When the process completes, the
drive enclosure's AUTO POWER switch check procedure screen is displayed.
IMPORTANT
Power supply failure can be prevented by connecting the power
cords on the PSU#0 side and the PSU#1 side to different power
sources.
CAUTION
Do Not
•
Do not use the server service outlet to connect a power cord for
the ETERNUS DX Disk storage system.
Release tie
Drive enclosure