FUJITSU Disk Storage System DX60 - Manual (Page 60)

Chapter 5 Installing Optional Products
5.1 Installing Disks
ETERNUS DX60 S2 Disk storage system User’s Guide -Operation-
60
Copyright 2012 FUJITSU LIMITED P3AM-5512-03ENZ0
5.1.4 Additional Disk Installation Procedure
This section describes how to install additional disks in the ETERNUS DX Disk storage system.
■ 2.5" disks
Procedure
1
Check that all components of the ETERNUS DX Disk storage system are in
normal status, using the Storage System Status screen of ETERNUS Web GUI.
2
Wear a wrist strap or touch a metal part to discharge the human body's natural
static electricity.
3
Remove the dummy disk unit from the slot in which the disk is to be installed.
Simultaneously push into the tabs in the upper and lower parts of the dummy disk unit, and
pull it straight out of the disk slot.
CAUTION
Do
• If additional disks are installed in a way other as described in this
section, damage and/or device failure or electrical shock may occur.
Do Not
• Do not install disks that are for use in other devices.
IMPORTANT
The removed dummy disk unit should be retained for future use.
Tabs
Dummy disk unit