Fisher & Paykel E442B - Manual (Page 12)

10
Installation instructions
3. Ventilation and installation
To ensure adequate ventilation for your refrigerator see recommended cabinetry
dimensions below.
The appliance is intended to be placed against a wall with a free distance not exceeding 75 mm.
These measurements do not include space for the water filter at the back of the cabinet as we
recommend that the filter is placed as close to the incoming water supply as possible.
Cabinetry dimensions (mm) (including
minimum air clearances)
E402B E442B E522B RF540A
A inside height 1745 1745 1745 1810
Flush with refrigerator chassis – full door rotation
B inside width 675 720 830 940
C inside depth 620 620 620 620
Flush with refrigerator door – 90° door rotation (for full drawer/shelf access, the doors need to
be open past 90˚)
D inside width 680 725 835 950
E inside depth flush to curved door – 675 675 –
F inside depth flush to flat door 690 690 690 690
Flush with refrigerator door – full door rotation
G inside width 795 840 950 1180
H inside depth flush to curved door 675 675 675 –
I inside depth flush to flat door 690 690 690 690
Minimum clearances
J side clearance 20 20 20 20
K side clearance – hinge side flush with
door – 90° rotation
25 25 25 25
L side clearance – hinge side flush with
door – full rotation
230 230 230 230
M rear clearance (incl. evaporator tray) 30 30 30 30
N vent 50 50 50 50