FARGO electronic HDP820 - Manual (Page 177)

RESTRICTED USE ONLY Fargo Electronics, Inc.
HDP 800 Series Card Printer/Encoders Service Manual (Rev. 5.0) 163
Attaching the Card Lamination Module (continued)
Step Procedure
17 Move the Printer's Release Lever to the Unlocked position and close the Print
Station and Transfer Station.
18 Installation of the field upgradeable Card Lamination Module is now complete.
To ensure a successful installation, install cards, Print Ribbon, HDP Film and
overlaminate and run the Lamination Self Test (color/Resin YMCK+L).
19 Install the LC version of the Printer model's Print Driver. Refer to the
Lamination tab for Lamination-related Printer Driver options. See the
Using the
Lamination tab (only with Card Lamination Module) procedure in Section 4 on
page 238.
(Note: The packaging for the HDP Printer has been designed to
accommodate shipping either the Printer-only or the fully assembled Printer
with Lamination Module. After assembling the complete Printer/Lamination
system, use the Printer packaging when transporting the unit.)