Using the print on back side only option – FARGO electronic HDP820 User Manual
Page 209
Advertising
RESTRICTED USE ONLY
Fargo Electronics, Inc.
HDP 800 Series Card Printer/Encoders Service Manual (Rev. 5.0)
195
Using the Print on Back Side Only option
Use this option to print only onto the backside of cards.
Step Procedure
1
Select this option to print only onto the backside of preprinted cards that must have
their Magnetic Stripe or smart card chip encoded. (Note: Load the cards in the
usual fashion.)
•
When this option is selected, the Print Both Sides option is automatically
disabled.)
•
When attempting to print a two-page document (if Print Back Side Only is
selected), the first page of the document will print on the backside of the card.
•
The second page of the document will then be printed on the back of a second
card.
Advertising