Technical specifications (continued) – FARGO electronic HDP820 User Manual

Page 27

Advertising
background image

RESTRICTED USE ONLY

Fargo Electronics, Inc.

HDP 800 Series Card Printer/Encoders Service Manual (Rev. 5.0)

13

Technical Specifications (continued)

Term Description

Display

User-friendly, SmartScreen LCD Control Panel; LED display on
Card Lamination Module.

Encoding Options

•

ISO Magnetic Stripe Encoding Module, dual high- and low-
coercivity, Tracks 1, 2 and 3

•

JIS II Magnetic Stripe Encoding Module

•

E-card Docking Station (required for all e-card options or 3rd
party smart card encoding)

•

Contact Smart Card Encoder (ISO 7816), Parts 1-4; T=0 & T=1

•

Contactless Smart Card Encoder (MIFARE

®

)

•

Prox Card Encoder (HID read-only) (Note: Corporate Express
1000 Cards can be used with special order Weigand/ASCII
Converter)

Fargo Certified
Supplies

Fargo Card Printer/Encoders require highly specialized media to
function properly. To maximize printed card quality and durability,
printhead life and printer/encoder reliability, use only Fargo Certified
Supplies, Fargo warranties are void, where not prohibited by law,
when non-Fargo Certified Supplies are used.

HDP Film Options

•

Clear, 1,250 prints

•

Standard Holographic

•

Custom Holographic, special order

HDP Film Storage
Temperature

77ºF (25ºC) or lower for no longer than 1.5 years.

Humidity

20% to 80% Non-Condensing.

Input Hopper Card
Capacity

HDP820/HDP820-LC: 250 cards (.030"/.762mm)

HDP825/HDP825-LC: 200 cards (.030"/.762mm)

Interface

•

Centronics parallel, IEEE-1284 Compliant

•

Optional USB to Parallel Adaptor

•

Interfacing information for E-card Options

Continued on the next page

Advertising