FARGO electronic HDP820 - Manual (Page 43)

RESTRICTED USE ONLY Fargo Electronics, Inc.
HDP 800 Series Card Printer/Encoders Service Manual (Rev. 5.0) 29
Printer Components: LCD and Softkey Control Pad (continued)
Component Description
Error/Attention
Screens The Printer is capable of communicating two similar yet different types of
message or prompt screens:
The first is called an ERROR screen. (Note: This screen appears if an
error occurs and will completely stop Printer operation. In this case, the
LCD will display ERROR on the first line and a brief description of the
error on the second line. If multiple errors occur at the same time, the first
line will display ERROR 1 of 2 or whatever the total number of errors may
be. To see the other error(s), use the scroll keys.)
• Press the Help button if you would like a more detailed explanation of
the error message. This will bring up the help screen explaining the
nature of the error and how to correct it. If necessary, use the scroll
buttons to scroll down the paragraph of help text.
• Press Quit when you are done reading. Once the error is corrected,
resume operation or reset the Printer according to how you were
instructed in the help screen.
The second type of prompt is called an Attention screen. (Note: This
screen will not stop Printer operation and serves to communicate helpful
reminders, such as if you are running low on print supplies and also
communicates any other Printer conditions of which you should be
aware. In this case, the LCD will display Attention on the first line and a
brief description of the condition on the second line.)
• If multiple messages need to be communicated at the same time, the
first line will display Attention 1 of 2 or whatever the total number of
messages may be.
• Like error messages, help text explaining the particular condition can
also be accessed by pressing the Help button.
Continued on the next page