FARGO electronic HDP820 - Manual (Page 220)

RESTRICTED USE ONLY Fargo Electronics, Inc.
HDP 800 Series Card Printer/Encoders Service Manual (Rev. 5.0) 206
Adjusting the Image Position controls (continued)
The display (below) represents how the printed image will move in relation to the fixed card
position as positive and negative image placement values are entered.
Step Procedure
2 Use the Vertical adjustment to move the image toward the rear of the Printer if a
positive number is entered and toward the front of the Printer if a negative number
is entered.
OR
Use the Horizontal adjustment to move the image toward the card output side of
the Printer if a positive number is entered and toward the card input side of the
Printer if a negative number is entered.
(Note: The maximum value for the Vertical and Horizontal adjustments is ±100
Pixels (10 Pixels = 0.03" (.8mm).)