FARGO electronic HDP820 - Manual (Page 271)

RESTRICTED USE ONLY Fargo Electronics, Inc.
HDP 800 Series Card Printer/Encoders Service Manual (Rev. 5.0) 257
Cleaning the Platen Rollers (continued)
Step Procedure
5 Locate the Transfer Platen Roller, as shown below.
6 Use a Cleaning Pad from the Printer Cleaning Kit to wipe the roller clean.
Press the Forward and Back buttons to move the roller back and forth while
cleaning.
If using a Printer with a Card Lamination Module, attached, wipe the
Lamination Platen Roller clean as well.
7 Replace the printing supplies and close the Print and Transfer Stations after
the rollers are clean and completely dry.
Transfer Platen Roller