Technical specifications (continued) – FARGO electronic HDP820 User Manual

Page 29

Advertising
background image

RESTRICTED USE ONLY

Fargo Electronics, Inc.

HDP 800 Series Card Printer/Encoders Service Manual (Rev. 5.0)

15

Technical Specifications (continued)

Term Description

Print Ribbon
Options

•

Full color, YMC, 700 prints

•

Full color with resin black, YMCK, 250 or 500 prints

•

Full color with two resin black Panels, YMCKK, 400 prints

•

Full color with resin black and heat seal Panel for difficult to print
surfaces, YMCKH, 400 prints; extra wide for over-the-edge
printing on CR-100 cards

All HDP ribbons utilize Fargo's exclusive RibbonTraq™ system for
maximum print quality, performance, reliability and ease of use.

Print Speed-Batch
Mode

•

35 seconds per card/112 cards per hour (YMC with transfer)

•

38 seconds per card/94 cards per hour (YMCK with transfer)

•

66 seconds per card/54 cards per hour (YMCKK with transfer)

•

40 seconds per card/90 cards per hour (YMCK/Lamination)*

•

72 seconds per card/50 cards per hour (YMCKK/Lamination)*

Resolution

300 dpi (11.8 dots/mm)

Software Drivers

Windows 95/ 98/ ME/ NT/ 2000/XP.

Supply Voltage

100 to 240 VAC, 3.75A.

Supply Frequency

50 Hz/60 Hz.

System
Requirements

IBM-PC or compatible. Windows 95/ 98/ ME/ NT/ 2000/XP.
Pentium

™

class 133 MHz computer with 32 MB of RAM or higher,

200 MB free hard disk space or higher and ECP parallel port with
DMA access.

Warranty

Printer: One year; optional Extended Warranty Program (U.S.
only)

Printhead: Lifetime; unlimited pass

Weight

HDP820/825: 70 lbs. (31.8kg).

HDP820-LC/825-LC: 87 lbs./39.5kg

LC Module: 21 lbs./9.5 kg

Advertising