Adjusting the ribbon type – FARGO electronic HDP820 User Manual
Page 202
Advertising
RESTRICTED USE ONLY
Fargo Electronics, Inc.
HDP 800 Series Card Printer/Encoders Service Manual (Rev. 5.0)
188
Adjusting the Ribbon Type
Use the Ribbon Type dropdown menu to match ribbon type.
Step Procedure
1
Adjust to match the Ribbon Type selection with the ribbon type that is loaded in
the Printer.
•
YMC: Yellow, Magenta, Cyan
OR
YMCK: Yellow, Magenta, Cyan, Resin Black
OR
•
YMCKK: Yellow, Magenta, Cyan, Resin Black, Resin Black
OR
•
YMCKH: Yellow, Magenta, Cyan, Resin Black, Heat Seal
Advertising