8 securing the server, Securing the server – FUJITSU SPARC ENTERPRISE M5000 User Manual
Page 244
13-18
SPARC Enterprise M4000/M5000 Servers Service Manual • August 2009
13.2.6
Removing the SPARC Enterprise M5000 DC-DC
Converter
Caution –
Use proper ESD grounding techniques when handling components. See
“Safety Precautions” on page 1-1
●
Pull the DC-DC converter from the socket and place it on the ESD mat
(
).
13.2.7
Installing the SPARC Enterprise M5000 DC-DC
Converter
Caution –
The converters designed to go into slots DDC_B#0 and DDC_B#1 have
metal heatsinks. If these converters are installed in any of the other slots, or if the
converters without heatsinks are installed in these slots, serious system damage may
result.
1. Place the DC-DC converter in the open slot.
2. Push gently downward to seat the DC-DC converter in the slot.
13.2.8
Securing the Server
1. Install all memory boards.
See
“Installing the Memory Board” on page 11-7
.
2. Install the top cover.
This step includes sliding the server in to the equipment rack and restoring the
antitilt features to their original position. See
3. Power on the server.
This step includes reconnecting power cables, verifying the state of the LEDs,
and turning the keyswitch to the Locked position. See
.