FUJITSU SPARC ENTERPRISE M5000 - Manual (Page 254)

14-8 SPARC Enterprise M4000/M5000 Servers Service Manual • August 2009
14.1.4 Securing the Server
1. Install the CD-RW/DVD-RW Drive Backplane.
This step includes installing the CD-RW/DVD-RW Drive Backplane and the CD-
RW/DVD-RW Drive Unit. See
“Installing the CD-RW/DVD-RW Drive Backplane
of the SPARC Enterprise M4000 Server” on page 6-18 .
2. Install the fan cover.
a. Align the tabs on the forward section of the fan cover and push the cover
down to secure it in place.
b. Tighten the captive screw on the fan cover.
c. Install the 60-mm fans.
Caution – The motherboard unit is a long and heavy assembly that houses the
system motherboard on the underside. Two people are recommended to lift the unit.
3. Install the motherboard unit.
This step includes installing the CPU modules and reattaching the cable
management arm. See
“Installing the SPARC Enterprise M4000 Motherboard
Unit” on page 13-6 .
4. Install the XSCF unit.
See “Installing the XSCF Unit” on page 9-5 .
5. Install the I/O unit.
See “Installing the I/O Unit” on page 8-11 .
6. Install the power supply units.
See “Installing the Power Supply Unit” on page 7-5 .
7. Install the top cover.
This step includes sliding the server in to the equipment rack and restoring the
rack antitilt features to their original position. See
“Replacing the Top Cover” on
page 5-8 .
8. Power on the server.
This step includes reconnecting power cables, verifying the state of the LEDs,
and turning the keyswitch to the Locked position. See
“Powering the Server On
Using Software” on page 4-13 .