FUJITSU SPARC ENTERPRISE M5000 - Manual (Page 9)

Contents vii
2.7.7.1 Options 2–36
2.8 Other Issues 2–37
2.8.1 Can’t Locate Boot Device 2–37
3. Periodic Maintenance 3–1
3.1 Tape Drive Unit 3–1
3.1.1 Cleaning the Tape Drive Unit 3–1
4. FRU Replacement Preparation 4–1
4.1 FRU Replacement Method 4–1
4.2 Active Replacement 4–4
4.2.1 Removing a FRU From a Domain 4–4
4.2.2 Removing and Replacing a FRU 4–5
4.2.3 Adding a FRU Into a Domain 4–5
4.2.4 Verifying Hardware Operation 4–6
4.3 Hot Replacement 4–6
4.3.1 Removing and Replacing a FRU 4–7
4.3.2 Verifying Hardware Operation 4–9
4.4 Cold Replacement (Powering the Server Off and On) 4–12
4.4.1 Powering the Server Off Using Software 4–12
4.4.2 Powering the Server On Using Software 4–13
4.4.3 Powering the Server Off Manually 4–14
4.4.4 Powering the Server On Manually 4–14
4.4.5 Verifying Hardware Operation 4–15
5. Internal Components Access 5–1
5.1 Sliding the Server In and Out to the Fan Stop 5–1
5.1.1 Sliding the Server Out of the Equipment Rack 5–2
5.1.2 Sliding the Server Into the Equipment Rack 5–4
5.2 Top Cover Remove and Replace 5–5