FUJITSU SPARC ENTERPRISE M5000 - Manual (Page 64)

2-26 SPARC Enterprise M4000/M5000 Servers Service Manual • August 2009
2.7 Traditional Solaris Diagnostic
Commands
These superuser commands can help you determine if you have issues in your
workstation, in the network, or within another server that you are networking with.
The following commands are described in this section:
■ “Using the iostat Command” on page 2-27
■ “Using the prtdiag Command” on page 2-28
■ “Using the prtconf Command” on page 2-30
■ “Using the netstat Command” on page 2-32
■ “Using the ping Command” on page 2-34
■ “Using the ps Command” on page 2-35
■ “Using the prstat Command” on page 2-36
Most of these commands are located in the /usr/bin or /usr/sbin directories.
Note – For additional details, options, examples, and the most up to date
information for each command refer to that command’s man page.