FUJITSU SPARC ENTERPRISE M4000 - Manual (Page 111)

nslookup(8)
System Administration 107
NAME nslookup - refer to the DNS server for the host
SYNOPSIS nslookup hostname
nslookup -h
DESCRIPTION nslookup (8) refers to the DNS server for the host.
The following information is displayed:
Privileges You must have one of the following privileges to run this command:
useradm , platadm, platop, auditadm, auditop, domainadm, domainmgr,
domainop , fieldeng
Refer to setprivileges(8) for more information.
OPTIONS The following option is supported:
OPERANDS The following operand is supported:
EXAMPLES EXAMPLE 1 Displays the host whose host name is scf0-hostname0.
EXIT STATUS The following exit values are returned:
Server DNS server name
Address IP address of DNS server
Name Specified host name
Address IP address of the host name
-h Displays usage statement. When used with other options or
operands, an error occurs.
hostname Specifies the host name to be referred. A Fully Qualified Domain
Name (FQDN) or a short form of the name can be specified.
XSCF> nslookup scf0-hostname0
Server: server.example.com
Address: xx.xx.xx.xx
Name: scf0-hostname0.example.com
Address: xx.xx.xx.xx
0 Successful completion.
>0 An error occurred.