FUJITSU SPARC ENTERPRISE M4000 - Manual (Page 313)

showdomainstatus(8)
System Administration 291
NAME showdomainstatus - display the current domain component list (DCL)
SYNOPSIS showdomainstatus -d domain_id
showdomainstatus -a
showdomainstatus -h
DESCRIPTION The showdomainstatus( 8 ) command displays the current status of the specified
domain.
One of the following states is displayed for each domain. Additional information
may be displayed.
Privileges You must have one of the following privileges to run this command:
Powered Off
Power is off.
Panic State
A panic occurred, and the domain is in the reset state.
Shutdown Started
The power-off process is starting.
Initialization Phase
OpenBoot PROM initialization is in progress.
OpenBoot Execution Completed
The system is in the OpenBoot PROM (ok prompt) state.
Booting/OpenBoot PROM prompt
The operating system is booting. Or due to the domain shutdown or reset,
the system is in the OpenBoot PROM running state or is suspended in the
OpenBoot PROM (ok prompt) state.
Running
Operating system is running.
-
Domain is not defined.
useradm , platadm, platop, fieldeng