FUJITSU SPARC ENTERPRISE M4000 User Manual
Page 27
Intro(8)
System Administration
5
showaudit
display the current auditing system state
showautologout
display the session timeout time of the XSCF shell
showboards
display information on an eXtended System Board (XSB)
showcod
display Capacity on Demand (COD) configuration
information
showcodlicense
display the current Capacity on Demand (COD) right-to-
use (RTU) licenses stored in the COD license database
showcodusage
display the current usage statistics for Capacity on Demand
(COD) resources
showconsolepath
display information on the domain console that is currently
connected
showdate
show the date and time of XSCF
showdcl
display the current domain component list (DCL)
showdevices
display current information on an eXtended System Board
(XSB)
showdomainmode
display the domain mode
showdomainstatus
display the current domain component list (DCL)
showdscp
display the IP addresses assigned to the Domain to Service
Processor Communications Protocol (DSCP)
showdualpowerfeed
display the current setting of dual power feed mode
showemailreport
display the email report configuration data
showenvironment
display the intake air temperature and humidity,
temperature sensor information, voltage sensor
information, and fan rotation information about the system
showfru
display the hardware settings of specified device
showhardconf
display information about field replaceable unit (FRU)
installed in the system
showhostname
display the current host name for the XSCF unit
showhttps
display the status of the HTTPS service set for the XSCF
network
showldap
display the Lightweight Directory Access Protocol (LDAP)
configuration for the Service Processor
showlocale
display the current setting for the XSCF locale
showlocator
display the state of the CHECK LED on the operator panel